HP 1920 Gigabit Ethernet Switch Series User Manual

166
a. Click the Port Setup tab.
b. Select Auto in the Voice VLAN port mode list.
c. Select Enable in the Voice VLAN port state list.
d. Enter voice VLAN ID 2.
e. Select GigabitEthernet 1/0/1 on the chassis front panel.
f. Click Apply.
Figure 157 Configuring voice VLAN on GigabitEthernet 1/0/1
5. Add OUI addresses to the OUI list:
a. Click the OUI Add tab.
b. Enter OUI address 0011-2200-0000.
c. Select FFFF-FF00-0000 in the Mask list.
d. Enter description string test.
e. Click Apply.
Figure 158 Adding OUI addresses to the OUI list

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English