212
Detailed information about the peer port appears on the lower part of the page. Table 68
describes the fields.
Figure 191 Displaying the information of LACP-enabled ports
Table 67 Field description
Field Descri
Unit ID of a device in a stack.
Port Port where LACP is enabled.
LACP State State of LACP on the port.
Port Priority LACP priority of the port.
State
Aggregation state of the port. If a port is Selected, this field also displays the ID
of the aggregation group it belongs to.
Inactive Reason
Reason code indicating why a port is Unselected for receiving or sending user
data. For more information about the reason codes, see the bottom of the page
shown in Figure 191.
To Next Page
Loading...
