HP 1920 Gigabit Ethernet Switch Series User Manual

232
Field Descri
p
tion
Port ID type
Port ID type:
• Interface alias.
• Port component.
• MAC address.
• Network address.
• Interface name.
• Agent circuit ID.
• Locally assigned—Locally-defined port ID type other than those listed
above.
Port ID Port ID value.
System capabilities supported
Capabilities supported on the system:
• Repeater.
• Bridge.
• Router.
System capabilities enabled
Capabilities enabled on the system:
• Repeater.
• Bridge.
• Router.
Auto-negotiation supported Indicates whether autonegotiation is supported on the port.
Auto-negotiation enabled Indicates whether autonegotiation is enabled on the port.
OperMau Speed and duplex state on the port.
Link aggregation supported Indicates whether link aggregation is supported.
Link aggregation enabled Indicates whether link aggregation is enabled.
Aggregation port ID
Link aggregation group ID. It is 0 if the neighbor port is not assigned to
any link aggregation group.
Maximum frame Size Maximum frame size supported on the neighbor port.
Device class
MED device class:
• Connectivity device—An intermediate device that provide network
connectivity.
• Class I—A generic endpoint device. All endpoints that require the
discovery service of LLDP belong to this category.
• Class II—A media endpoint device. The class II endpoint devices
support the media stream capabilities and the capabilities of generic
endpoint devices.
• Class III—A communication endpoint device. The class III endpoint
devices directly support end users of the IP communication system.
Providing all capabilities of generic and media endpoint devices,
Class III endpoint devices are used directly by end users.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English