HP 1920 Gigabit Ethernet Switch Series User Manual

316
Item Descri
p
tion
Port Number
Set the port number for HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
IMPORTANT:
When you modify a port, make sure the port is not used by any other
service.
ACL
Associate the HTTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
HTTPS
Enable HTTPS
service
Enable or disable the HTTPS service.
The HTTPS service is disabled by default.
Certificate
Select a local certificate for the HTTPS service from the Certificate
dropdown list.
You can configure the certificates available in the dropdown list in
Authentication > Certificate Management. For more information, see
"Managing certificates."
IMPORTANT:
If no cert
ificate is specified, the HTTPS service generates its own
certificate.
Port Number
Set the port number for HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
IMPORTANT:
When you modify a port, make sure the port is not used by any other
service.
ACL
Associate the HTTPS service with an ACL. Only the clients that pass the
ACL filtering are permitted to use the HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English