HP 1920 Gigabit Ethernet Switch Series User Manual

361
5. Configure the ISP domain to use local authentication:
a. Select Authentication > AAA from the navigation tree.
b. Click the Authentication tab.
c. Select the domain test.
d. Select Login AuthN and select the authentication method Local.
Figure 342 Configuring the ISP domain to use local authentication
e. Click Apply.
A configuration progress dialog box appears, as shown in Figure 343.
f. A
fter the configuration process is complete, click Close.
Figure 343 Configuration progress dialog box
6. Configure the ISP domain to use local authorization:
a. Select Authentication > AAA from the navigation tree.
b. Click the Authorization tab.
c. Select the domain test.
d. Select Login AuthZ and select the authorization method Local.
e. Click Apply.
A configuration progress dialog box appears.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English