HP 1920 Gigabit Ethernet Switch Series User Manual

377
3. Select the Authentication tab to configure the authentication scheme:
a. Select the domain name test.
b. Select Default AuthN and select RADIUS as the authentication mode.
c. Select system from the Name list to use it as the authentication scheme.
d. Click Apply.
A configuration progress dialog box appears.
e. After the configuration process is complete, click Close.
Figure 359 Configuring the AAA authentication method for the ISP domain
Figure 360 Configuration progress dialog box
4. Select the Authorization tab to configure the authorization scheme:
a. Select the domain name test.
b. Select Default AuthZ and select RADIUS as the authorization mode.
c. Select system from the Name list to use it as the authorization scheme.
d. Click Apply.
A configuration progress dialog box appears.
e. After the configuration process is complete, click Close.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English