HP 1920 Gigabit Ethernet Switch Series User Manual

35
Figure 22 System parameter configuration page
2. Configure the parameters as described in Table 3.
Table 3 Configuration items
Item Descri
p
tion
Sysname
Specify the system name.
The system name appears at the top of the navigation tree.
You can also set the system name in the System Name page you enter by selecting
Device > Basic. For more information, see "Configuring basic device settings."
Syslocation
Specify the physical location of the system.
You can also set the physical location in the setup page you enter by selecting
Device > SNMP. For more information, see "Configuring SNMP."
Syscontact
Set the contact information for users to get in touch with the device vendor for help.
You can also set the contact information in the setup page you enter by selecting
Device > SNMP. For more information, see "Configuring SNMP."

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English