HP MSR SERIES User Manual

165
Figure 164 Network diagram
Configuration procedure
# Configure IP addresses for the interfaces. (Details not shown.)
# Enable the blacklist function.
• Select Security Setup > Attack Defend > Blacklist from the navigation tree, and then perform the
following configurations, as shown in Figure 165.
Figure 165 Enabling the blacklist function
• Select the box before Enable Blacklist.
• Click Apply.
# Add blacklist entries manually.
• Click Add and then perform the following configurations, as shown in Figure 166:
Figure 166 Adding a blac
klist entry for Host D

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing