HP MSR SERIES User Manual

217
Figure 222 DHCP address pool 1 configuration
7. Configure DHCP address pool 2 (including the address range, lease duration and gateway IP
address):
a. Enter pool2 in the Pool Name field, as shown in Figure 223.
b. Selec
t the Dynamic Allocation option in the Address Allocation Mode field.
c. Enter 10.1.1.128 in the IP Address field.
d. Select the Subnet Mask box, and then enter 255.255.255.128.
e. Set the Lease Duration to 5 days, 0 hours, and 0 minutes.
f. Select the Gateway IP Address box, and then enter 10.1.1.254.
g. Click Apply.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing