HP MSR SERIES User Manual

280
Figure 292 Assigning Ethernet 1/1 to bridge set 2 and enable VLAN transparency
b. Select Ethernet1/1 from the Interface list.
c. Select 2 from the Bridge Group list.
d. Select Enable from the VLAN Transmit list.
e. Click Apply.
# Assign Ethernet 1/2 to bridge set 2, and enable VLAN transparency.
Figure 293 Assigning Ethernet 1/2 to bridge set 2 and enable VLAN transparency
b. Select Ethernet1/2 from the Interface list.
c. Select 2 from the Bridge Group list.
d. Select Enable from the VLAN Transmit list.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing