293
Figure 306 Configuring access control for user group staff
2. Select staff from the user group list.
3. Select the boxes for Monday through Friday.
4. Specify 09:00 as the start time.
5. Specify 18:00 as the end time.
6. Click Apply.
A configuration progress dialog box appears.
7. After the configuration process is complete, click Close.
Loading the application control file (assume the signature file is stored on the device)
1. Select Security Setup > Application Control from the navigation tree, and then select the Load
Application tab.
Figure 307 Loading the application control file
To Next Page
Loading...
