HP MSR SERIES - Page 51

34
ADSL/G.SHDSL interface
Figure 20 Setting ADSL/G.SHDSL parameters
Table 14 Configuration items (in IPoA mode)
Item Descri
p
tion
WAN Interface Select the ADSL/G.SHDSL interface to be configured.
Connect Mode: IPoA Select the IPoA connect mode.
PVC Specify the VPI/VCI value for PVC.
TCP-MSS Set the maximum TCP segment length of an interface.
MTU Set the MTU of an interface.
IP Address Specify the IP address of the ADSL/G.SHDSL interface.
Subnet Mask Select a subnet mask for the ADSL/G.SHDSL interface.
Map IP Specify the peer destination IP address of the mapped PVC.
Table 15 Configuration items (in IPoEoA mode)
Item Descri
p
tion
WAN Interface Select the ADSL/G.SHDSL interface to be configured.
Connect Mode: IPoEoA Select the IPoEoA connect mode.
PVC Specify the VPI/VCI value for PVC.
TCP-MSS Set the maximum TCP segment length of an interface.
MTU Set the MTU of an interface.
IP Address Specify the IP address of the ADSL/G.SHDSL interface.
Subnet Mask Select a subnet mask for the ADSL/G.SHDSL interface.
Table 16 Configuration items (in PPPoA mode)
Item Descri
p
tion
WAN Interface Select the ADSL/G.SHDSL interface to be configured.