HP MSR SERIES - Page 52

35
Item Descri
p
tion
Connect Mode: PPPoA Select the PPPoA connect mode.
PVC Specify the VPI/VCI value for PVC.
User Name Specify the user name for identity authentication.
Password
Displays whether a password has been specified for identity authentication.
An empty field indicates that no password is configured.
New Password Specify or modify the password for identity authentication.
TCP-MSS Set the maximum TCP segment length of an interface.
MTU Set the MTU of an interface.
Table 17 Configuration items (in PPPoEoA mode)
Item Descri
p
tion
WAN Interface Select the ADSL/G.SHDSL interface to be configured.
Connect Mode: PPPoEoA Select the PPPoEoA connect mode.
PVC Specify the VPI/VCI value for PVC.
User Name Specify the user name for identity authentication.
Password
Displays whether a password has been specified for identity authentication.
An empty field indicates that no password is configured.
New Password Specify or modify the password for identity authentication.
TCP-MSS Set the maximum TCP segment length of an interface.
MTU Set the MTU of an interface.
Online for all time
Select an idle timeout value from either of the following:
• Online for all time—The device is always online.
• Online according to the idle timeout value—The device disconnects from the
server if no data exchange occurs between it and the server within the specified
time. After that, it automatically establishes the connection upon receiving a
request for accessing the Internet from the LAN.
When Online according to the Idle Timeout value is enabled, specify an idle
timeout value.
Online according to the
Idle Timeout value
Idle timeout
CE1/PR1 interface
The CE1/PR1 interface operates in two modes: E1 mode and CE1 mode.
1. In E1 mode