HP MSR SERIES User Manual

517
b. Select 10 for VLAN ID.
c. Enter 163.172.55.1 for IP Address.
d. Enter 255.255.255.0 for Subnet Mask.
e. Click Apply.
# Enable WiNet.
f. Select WiNet from the navigation tree.
When WiNet is disabled, a dialog box Only the WiNet administrator supports the function
appears.
g. Click OK.
Figure 545 Enabling WiNet
c. Enter WiNet for WiNet Name.
d. Click Advance Options.
e. Enter 10 for Management VLAN.
f. Enter 192.168.0.1 for IP Pool (Administrator IP).
g. Select 255.255.255.0 for Mask of IP Pool.
h. Click Build WiNet.
Verifying the configuration
After the preceding configuration is complete, log in to Device B via Ethernet 0/1, select WiNet from the
navigation tree to enter the WiNet Management page. You can view a WiNet topology diagram
comprising an administrator (Device B) and two members (Device A and Device C), and manage the
devices, as shown in Figure 546.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing