HP MSR SERIES - Page 54

37
Table 19 Configuration items (in CE1 mode)
Item Descri
p
tion
WAN Interface Select the CE1/PR1 interface to be configured.
Work Mode: CE1 Select the CE1 work mode.
Operation
Select one of the following operation actions:
• Create—Binds timeslots.
• Remove—Unbinds timeslots.
Serial Select a number for the created Serial interface.
Timeslot-List Specify the timeslots to be bound or unbound.
User Name Specify the user name for identity authentication.
Password
Display whether a password has been specified for identity authentication.
An empty field indicates that no password is configured.
New Password Specify or modify the password for identity authentication.
TCP-MSS Set the maximum TCP segment length of an interface.
MTU Set the MTU of an interface.
CT1/PR1 interface
Figure 23 Setting CT1/PR1 parameters
Table 20 Configuration items
Item Descri
p
tion
WAN Interface Select the CT1/PR1 interface to be configured.
Work Mode: E1 Select the CT1 work mode.
Operation
Select one of the following operation actions:
• Create—Binds timeslots.
• Remove—Unbind timeslots.