HP MSR SERIES User Manual

661
2. Click Add.
The page for configuring a server group appears.
Figure 689 Configuring server information management
3. Configure server information management as described in Table 258.
4. Click Apply.
Table 258 Configuration items
Item Descri
p
tion
Server ID
Set server ID. A SIP server group can be configured with up to five member servers.
A server ID represents the priority of the server in the SIP server group. The smaller
the ID, the higher the priority.
Transport Layer Protocol
• UDP—Specify UDP as the transport layer protocol for the connections between
the SIP trunk device and the SIP server.
• TCP—Specify TCP as the transport layer protocol for the connections between
the SIP trunk device and the SIP server.
• TLS—Specify TLS as the transport layer protocol for the connections between the
SIP trunk device and the SIP server.
By default, the UDP protocol is adopted.
URL Scheme
• SIP—Specify the SIP scheme as the URL scheme.
• SIPS—Specify the SIPS scheme as the URL scheme.
By default, the SIP URL scheme is adopted.
Server Address Specify the IPv4 address or domain name of the SIP server.
Port Number Specify the port number of the SIP server.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing