HP MSR SERIES - Page 695

678
25. Enter 2000 for Destination Number.
26. Select IP Routing for SIP Route Type.
27. Enter 1.1.1.1 for Destination Address.
28. Click Apply.
Configuring Router B
# Configure a local call number.
1. Select Voice Management > Local Number from the navigation tree and click Add.
Figure 708 Configuring a local number
2. Enter 1000 for Number ID.
3. Enter 1000 for Number.
4. Select subscriber-line 8/0 from the Bound Line list.
5. Click Apply.
# Configure a call route.
6. Select Voice Management > Call Route from the navigation tree and click Add.
Figure 709 Configuring a call route
7. Enter 2000 for Call Route ID.