HP V1910 Switch Series User Manual

157
# Configure GigabitEthernet 1/0/1 as a hybrid port.
 Select Device > Port Management from the navigation tree, and click the Setup tab to enter the
page shown in Figure 141.
Figure 141 Configure GigabitEthernet 1/0/1 as a hybrid port
 Select Hybrid from the Link Type drop-down list.
 Select GigabitEthernet 1/0/1 from the chassis front panel.
 Click Apply.
# Configure the voice VLAN function globally.
 Select Network > Voice VLAN from the navigation tree and click the Setup tab to enter the page
shown in Figure 142.

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English