HP V1910 Switch Series User Manual

331
Figure 296 Create an ISP domain
 Enter test in the Domain Name textbox.
 Select Enable to use the domain as the default domain.
 Click Apply to finish the operation.
# Configure the AAA authentication method for the ISP domain.
 Select the Authentication tab.
Figure 297 Configure the AAA authentication method for the ISP domain
 Select the domain name test.
 Select the Default AuthN checkbox and then select RADIUS as the authentication mode.

HP V1910 Switch Series Specifications

General

Product Series	V1910
VLAN Support	Yes
QoS	Yes
Ports	8, 24, or 48 10/100/1000 ports
MAC Address Table Size	8K entries
Power Supply	Internal power supply
Jumbo Frame Support	Yes
Operating Humidity	10% to 90% (non-condensing)