HP V1910 Switch Series User Manual

332
 Select system from the Name drop-down list to use it as the authentication scheme.
 Click Apply. A configuration progress dialog box appears, as shown in Figure 298.
Figure 298 Configuration progress dialog box
 After the configuration process is complete, click Close.
# Configure the AAA authorization method for the ISP domain.
 Select the Authorization tab.
Figure 299 Configure the AAA authorization method for the ISP domain
 Select the domain name test.
 Select the Default AuthZ checkbox and then select RADIUS as the authorization mode.
 Select system from the Name drop-down list to use it as the authorization scheme.
 Click Apply. A configuration progress dialog box appears.
 After the configuration process is complete, click Close.
# Configure the AAA accounting method for the ISP domain.
 Select the Accounting tab.

HP V1910 Switch Series Specifications

General

Product Series	V1910
VLAN Support	Yes
QoS	Yes
Ports	8, 24, or 48 10/100/1000 ports
MAC Address Table Size	8K entries
Power Supply	Internal power supply
Jumbo Frame Support	Yes
Operating Humidity	10% to 90% (non-condensing)