Step 6 For details about how to commission IP cameras and set parameters for them, see
the documentation delivered with the equipment or obtain the documentation by
referring to the "Preparing Documentation" section.
1. Preview the site situation in real time and check the camera coverage through
videos. Adjust the lens if necessary.
2. (Optional) If the VCN is not
congured, congure an SD card. For details, see
6.5.3.2 Commissioning IPC6325 Camera (SD Card Congured).
3. Choose Settings > Video/Audio/Image > Video Settings, and set camera
stream type, primary stream, and secondary stream 1 parameters.
Set the encoding protocol to H.265.
Figure 6-16 Setting primary stream parameters
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 6 Feature Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 150
To Next Page
Loading...
