Parameter Setting Description
Branch auto-
ll mode
● Ascending order
● Descending order
● Ascending order: If the
branch for the rst cabinet
is 1QF1(L1), 2QF1(L1),
the branches for
subsequent cabinets are
1QF2(L2), 2QF2(L2), and
the like.
● Descending order: If the
branch for the
rst cabinet
is 1QF10(L1), 2QF10(L1),
the branches for
subsequent cabinets are
1QF9(L3), 2QF9(L3), and
the like.
Figure 6-72 Power conguration
ECC800 Data Center Controller
User Manual (for ECC800-Pro) 6 Feature Description
Issue 02 (2020-09-07) Copyright © Huawei Technologies Co., Ltd. 220
To Next Page
Loading...
