DACS-W Operation Manual 11 OPTION
11-21
11.4.3.4 Sample Range -
This defines the minimum pack weight below which the pack will not be included in the sampling. To
set Sampling Range - follow the procedures listed below.
11.4.3.5 FBC Unused Range +
This defines the average weight value which activates FBC when this weight is exceeded. To set FBC
Unused Range + follow the procedures listed below.
11.4.3.6 FBC Unused Range -
This defines the average weight value below which activates FBC when this weight is not reached. To
set FBC Unused Range - follow the procedures listed below.
1. Call up the FBC Setting menu.
2. Press and move the cursor to Sampling
Range -.
3. Set value via ten-keys.
The setting for Sampling Range - is
complete.
Figure 11-51 FBC Setting Menu
1. Call up the FBC Setting menu.
2. Press and move the cursor to FBC
Unused Range +.
3. Set value via ten-keys.
The setting for FBC Unused Range + is
complete.
Figure 11-52 FBC Setting Menu
1. Call up the FBC Setting menu.
2. Press and move the cursor to FBC
Unused Range -.
3. Set value via ten-keys.
The setting for FBC Unused Range - is
complete.
Figure 11-53 FBC Setting Menu
ENTER
▼
* Sample Range + 100.0 g
* Sample Range - 100.0 g
* FBC Unused Range + 1.0 g
[FBC Setting]
ENTER
▼
* Sample Range + 100.0 g
* Sample Range - 100.0 g
* FBC Unused Range + 1.0 g
[FBC Setting]
ENTER
▼
* FBC Unused Range - 1.0 g
[FBC Setting]
* Sample Count 5
* Sample Interval 2
To Next Page
Loading...
Need help?
General