5 NORMAL OPERATIONS & FUNCTIONS DACS-W Operation Manual
5-30
5.6.2.7 Auto Lots Total Time
This item is only in effect when the optional printer is installed.
When this item is set, all lot totals are automatically printed out at the scheduled time. When printing is
completed, Clear All Totals is performed.
The setting procedure is as follows.
1. Call up the Statistics & Print Setting menu.
2. Press to scroll the cursor to "Auto Lots
Total Time".
3. Press .
The Auto Lots Total Time menu appears.
Figure 5-69 Statistics & Print Setting Menu
4. Press or to align cursor with desired
item.
• A maximum of 4 times can be entered.
Figure 5-70 Auto Lots Total Time Menu
5. Press .
The Total Time menu appears.
6. Enter the time in 24-hour clock format via the
ten-key pad.
(Example: 1:08 p.m.=1308)
The set time is displayed on the All Lots
Total Time menu.
7. To cancel set time, press with the display
showing the time to be canceled.
8. Press .
The Statistics & Print Setting menu will
appear.
Figure 5-71 Total Time 1 Menu
ENTER
▼
SELECT
ITEM
[Statistics & Print Setting]
* Batch:Total Time 9 h
* Batch:Total Count 1000 pc
* Auto Lots Total Time
ENTER
▼
▲
[Auto Lots Total Time]
* Total Time 1 :
* Total Time 2 :
* Total Time 3 :
SELECT
ITEM
C
EXIT
[Total Time 1]
Enter time in
24-hour clock HHMM format.
To Next Page
Loading...
Need help?
General