5 NORMAL OPERATIONS & FUNCTIONS DACS-W Operation Manual
5-18
5.6.1.2 Upper Limit
This item defines the maximum weight which will be judged as a proper pack. Packs over this limit will
be judged as overweight.
The upper limit value is entered as the amount of difference above the reference weight value (+). The
setting is entered in units of 0.1g.
For example: if the Reference Weight is 100g, and the Upper Limit is 5.0g, packs which exceed 105g
are judged overweight.
Follow the procedure described below to set the Upper Limit value.
5.6.1.3 Lower Limit
This item defines the minimum weight which will be judged as a proper pack. Packs under this limit will
be judged as underweight.
The lower value is entered as the amount of difference under the reference weight value (-). The setting
is entered in units of 0.1g.
For example: if the reference weight is 100g, and the Lower Limit is 5.0g, packs which are less than 95g
are judged underweight.
Follow the procedure described below to set the Lower Limit value.
5. Enter the Reference Weight value.
The entered Reference Weight is displayed
and Reference Weight setting is complete.
Figure 5-32 Preset Menu
1. Call up the Preset menu.
2. Press to scroll the cursor to "Upper Limit
+".
3. Enter the Upper Limit value.
The entered Upper Limit value is displayed
and Upper Limit setting is complete.
Figure 5-33 Preset Menu
[Preset]
* Reference Weight 100.0 g
* Upper Limit + 0.0 g
* Lower Limit - 0.0 g
No. 2
ENTER
▼
[Preset]
* Reference Weight 100.0 g
* Upper Limit + 5.0 g
* Lower Limit - 0.0 g
No. 2
To Next Page
Loading...
Need help?
General