ISHIDA DACS-W - Batch Analysis; Batch Column Auto Printout

5 NORMAL OPERATIONS & FUNCTIONS DACS-W Operation Manual
5-28
5.6.2.3 Batch Analysis
This item is used to select Batch Analysis fields: OFF (no analysis), Time (time interval analysis), Count
(all product analysis), or Accept Count (product range analysis). The setting procedure is as follows.
5.6.2.4 Batch Column Auto Printout
Batch Column Auto Printout function is available only when an optional printer is installed. This item
is used to select whether to automatically print or not print the results of a Batch Analysis.
The setting procedure is as follows.
1. Call up the Statistics & Print Setting menu.
2. Press to scroll the cursor to Auto Printout.
3. Press key.
The Auto Printout menu appears.
4. Press [0] to prohibit printout.
Press [1] to activate printout.
The Statistics & Print Setting menu appears.
1. Call up the Statistics & Print Setting menu.
2. Press to scroll the cursor to Batch
Analysis.
3. Press .
The Batch Analysis menu appears.
4. Press [0] to set to OFF.
Press [1] to set time interval.
Press [2] to set item count.
Press [3] to set Accept Count.
The selected Batch Analysis setting appears
in the Statistics & Print Setting menu.
Figure 5-63 Statistics & Print Setting Menu
Figure 5-64 Batch Analysis Menu
ENTER

▼

SELECT
ITEM
[Statistics & Print Setting]
* Total Items Accept
* Auto Printout OFF
* Batch Analysis Time
[Auto Printout]
0...OFF
1...ON
ENTER

▼

SELECT
ITEM
[Statistics & Print Setting]
* Total Items Accept
* Auto Printout OFF
* Batch Analysis Time
[Batch Analysis]
0...OFF 1...Time
2...All Count 3...Accept Count