ISHIDA DACS-W User Manual

1 SAFETY DACS-W Operation Manual
1-6
1.5 Warning Labels
Warning labels which indicate points requiring particular caution are attached to the weigher at certain
locations. Please take sufficient time to familiarize yourself thoroughly with the meanings and positions
of these labels.
1.5.1 Warning Label Handling
• First verify that all the warning labels are clearly legible. If the label text or graphic is difficult to
read, clean or replace the label.
• Clean labels with water and neutral cleanser.
Do not use organic solvents or gasoline.
• Labels must be replaced if they are damaged, peeled or illegible.
For this, please contact your local Ishida Service representative.
1.5.2 Warning Label Location
The diagram below shows the location of the warning label.
Figure 1-1 Warning Label Location

ISHIDA DACS-W Specifications

General

Brand	ISHIDA
Model	DACS-W
Category	Measuring Instruments
Language	English