ISHIDA DACS-W - Changing to the Site Engineer Level

5 NORMAL OPERATIONS & FUNCTIONS DACS-W Operation Manual
5-10
5.4.2 Changing to the Site Engineer Level
To access the Site Engineer level from another level, follow the procedure shown below.
The Site Engineer level password is required to execute this procedure.
< From the Operator Level >
< From the Installation Engineer Level >
1. In the Production Standby menu, press .
The Operator Level Setup Menu appears.
2. Press , and align the cursor with "Access
Level Change".
Figure 5-7 Setup Menu (Level 0)
3. Press .
The Access Level Change menu appears.
4. Enter the Site Engineer Level password.
The Level 1 Setup Menu appears.
Figure 5-8 Access Level Change Menu
1. In the Production Standby menu, press .
The Installation Engineer level Setup Menu
appears.
2. Press , and align the cursor with "Access
Level Change".
Figure 5-9 Setup Menu (Level 2)
3. Press .
The Access Level Change menu appears.
4. Enter the Site Engineer Level password.
The Level 1 Setup Menu appears.
Figure 5-10 Access Level Change Menu
SET
UP
ENTER

▼

[Setup Menu]
* Preset 2
* Access Level Change Level 0
SELECT
ITEM
[Access Level Change]
Enter password.
SET
UP
ENTER

▼

[Setup Menu]
* Preset 2
* Access Level Change Level 2
* Statistics & Print Setting
SELECT
ITEM
[Access Level Change]
Enter password.