Juniper EX4550 Hardware Guide

Table 49: Optical interface Support and Copper Interface Support for 1-gigabit SFP Transceivers
in EX4550 Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-GE10KT14R13Model number1000BASE-BX-D
1000 MbpsRate
LCConnector type
SingleFiber count
1490 nmTransmitter wavelength
1310 nmReceiver wavelength
–9 dBmMinimum launch power
–3 dBmMaximum launch power
–30 dBmMinimum receiver sensitivity
–3 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
10 km (6.2 miles)Distance
AvailableDOM support
•
EX4550-32T-AFI, EX4550-32T-AFO, EX4550-32T-DC-AFI,
EX4550-32T-DC-AFO, EX4550-32F-AFI, EX4550-32F-AFO,
EX4550-32F-DC-AFI, and EX4550-32F-DC-AFO
switches—Junos OS for EX Series switches,Release 11.2 or later
•
EX4550-32F-S switches—Junos OS for EX Series switches,
Release 12.3R5 or later
Software required
99Copyright © 2015, Juniper Networks, Inc.
Chapter 8: Transceiver and Cable Specifications

Juniper EX4550 Specifications

Console Connection Settings

baud rate	9600
data bits	8
stop bits	1