Juniper SRX5400 - Page 315

root@node0% cli show configuration | save /var/tmp/config[date]
h. Copy the configuration file to the USB flash drive:
root@node0% cp /var/tmp/config[date] /var/tmp/usb/config[date]
i. Check whether any scripts are referenced in the configuration:
root@node0> show configuration system scripts
{secondary:node0}
root@node0> show configuration system scripts
set system scripts commit file interface-monitoring-check.slax
set system scripts op file srx-monitor.xsl
root@node0> show configuration event-options
{secondary:node0}
root@node0> show configuration event-options
set event-options generate-event 60s time-interval 60
set event-options policy NAT-POOL-UTIL events 60s
set event-options policy NAT-POOL-UTIL then event-script
srx-nat-bucket-overload.slax arguments utilization-threshold 90
set event-options policy NAT-POOL-UTIL then event-script
srx-nat-bucket-overload.slax arguments pool GLOBAL
set event-options event-script traceoptions file escript.log size 1m files 2
set event-options event-script traceoptions flag output
set event-options event-script file srx-monitor-addbook-policy-count.slax
j. If any scripts are referenced in the configuration, back up these scripts:
root@node0% cp -r /var/db/scripts/ /var/tmp/usb/scripts/
k. Verify the files copied to the USB flash drive:
root@node0% ls /var/tmp/usb
l. Unmount the USB flash drive:
root@node0% umount /var/tmp/usb
m. Remove the USB flash drive.
n. Exit the shell.
root@node0% exit
318