Keithley 2280 Series Reference Manual

Series 2280 Precision DC Power Supply Reference Manual Section 2: General operation
077085503 / March 2019 2-91
Format reset values
Setting*
Default value reset from
MENU > System > Settings
> Reset
Default value reset by
the *RST (on page 7-7)
command or
:SYSTem:PRESet (on
page 7-124) command
Not available from front panel
:FORMat:ELEMents (on page 7-14)
Not applicable
"READ, SOUR, UNIT,
REL"
* Some of the options listed in this table are only available for specific functions. If you do not see the option listed
here on the menu, it may not be available for the function you are using.
Output reset values
Setting*
Default value reset from
MENU > System > Settings
> Reset
Default value reset by
the *RST (on page 7-7)
command or
:SYSTem:PRESet (on
page 7-124) command
MENU > Source > Settings > Output
:OUTPut[:STATe] (on page 7-59)
Off
0 (Off)
MENU > Source > Settings > Output Delay
:OUTPut:DELay:STATe (on page 7-56)
Off
0 (Off)
MENU > Source > Settings > Slew Rise
:OUTPut:DELay:RISing (on page 7-55)
100.0 V/s
0.0
MENU > Source > Settings > Slew Fall
:OUTPut:DELay:FALLing (on page 7-54)
100.0 V/s
0.0
* Some of the options listed in this table are only available for specific functions. If you do not see the option listed
here on the menu, it may not be available for the function you are using.

Keithley 2280 Series Specifications

General

Brand	Keithley
Model	2280 Series
Category	Power Supply
Language	English