Section 2: General operation Model 2651A High Power System SourceMeter® Instrument Reference Manual
2-18 2651A-901-01 Rev. A / March 2011
Menu selection Description For more information,
see:
LINE-FREQ Configures the line frequency General operation (on
page 2-1)
- 50Hz Set the line frequency to 50 Hz
- 60Hz Set the line frequency to 60 Hz
- AUTO Enables automatic line frequency detection during start
up
SYSTEM-INFO Displays the system information General operation (on
page 2-1)
- FIRMWARE Displays the version of firmware installed
- SERIAL# Displays the serial number of the unit
- CAL Displays the last calibration date
- MEMORY-USAGE Displays memory usage in kilobytes
RESET-PASSWORD Resets the system password Password management
To Next Page
Loading...
Need help?
General
