-438 Keysight E4980A/AL User’s Guide
Error Messages
Error Messages
-
-158 String data not allowed
String data is not allowed.
-151 Invalid string data
Invalid string data was received (for example, END received before close
quote).
-150 String data error
String data is improper.
-148 Character data not allowed
Character data not allowed for this operation.
-144 Character data too long
Character data is too long (maximum length is 12 characters).
-141 Invalid character data
Bad character data or unrecognized character data was received.
-140 Character data error
Character data is improper.
-138 Suffix not allowed
A suffix is not allowed for this operation.
-131 Invalid suffix
Units are unrecognized, or the units are not appropriate.
-128 Numeric data error
Numeric data is improper.
-128 Numeric data not allowed
Numeric data not allowed for this operation.
-123 Exponent too long
The magnitude of the exponent was larger than 32000.
-121 Invalid character in number
Invalid character in numeric data.
-114 Header Suffix out of Range
The header suffix is out of range.
-113 Undefined header
A command not defined in this instrument, though not illegal in the syntactic
structure, has been received. For example, when the message
“:OUTP:DC:ISOL:FREQ:AUTO ON” is sent instead of the correct program
To Next Page
Loading...
