Krone Big Pack 4x4 - Page 233

Settings
233
Pos: 34.81.30 /BA/E instellungen/Großpac kenpresse/Variab les Füllsystem VFS/Bi G PACK 4x4/Tastschwinge versetzen Hinweis 2 @ 107\mod _1334224711005_78.doc x @ 964688 @ @ 1
Note
When the feeler rocker has been moved, the following setting must be checked and, if
required, adjusted.
• Preset threaded rod depending on the position of the feeler rocker (see table)
• Preset stop depending on the position of the feeler rocker (see table)
• Check zero position (see Settings section “Zero position”)
• Check spring of the zeroizing device and, if required, adjust (see Settings
section “Adjusting spring of the zeroizing device”)
• Check and, if required, adjust triggering sensitivity (see Settings section
“Adjusting triggering sensitivity”)
• Check stop for feeler rocker and, if required, adjust (see Settings section
“Adjusting the feeler rocker stop”)
• Check and, if required, adjust absorbing mechanism (see Settings section
“Adjusting absorbing mechanism”)
Pos: 34.81.31 /BA/---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.doc x @ 4165 @ 2 @ 1