Commissioning
49
Pos: 18.1 /Überschri ften/Überschri ften 1/A-E/Erstinbetr iebnahme @ 0\mod_119631 4201498_78.doc x @ 5855 @ @ 1
5 Commissioning
Pos: 18.2 /BA/Sic herheit/Gefahrenhin weise/Inbetriebnah meGefahr - Unvorhergeseh ene Inbetriebnahme_3 Bi G Pack @ 17\mod_123625095172 2_78.docx @ 204008 @ @ 1
DANGER! - Accidental start-up of the machine, moving parts of the machine and / or
unexpected movement of the machine!
Effect: Danger to life, injuries or damage to the machine.
• Special caution is required when mounting and detaching the machine on and from the
tractor No one may stay between the tractor and machine. After successful coupling turn
off the engine and pull out the ignition key. Apply the flywheel brake.
• In service, maintenance, adjustment and repair work on the machine always switch the
P.T.O. shaft off, turn off the engine and pull out the ignition key
• Put the machine into operation only if all safety devices are attached and in protective
position
• The machine may be operated with a maximum P.T.O. speed of 1000 rpm
• Only the universal shaft specified by the manufacturer with corresponding overload
coupling and freewheel may be used
• Mounting and detaching the universal shaft only with the P.T.O. shaft disengaged, the
engine turned off and the ignition key withdrawn
• Run hoses and connection cables so that they are not subject to tension when cornering
or come into contact with the tractor wheels
• Check hydraulic hose lines regularly and replace them in the case of damage or ageing
• When connecting and removing the hydraulic hoses to and from the tractor hydraulics
take care that the hydraulics are depressurised both on the tractor side and the machine
side
Pos: 18.3 /BA/--- ------------ Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
