Krone Big Pack 4x4 - Pick-Up Drive (III)

Maintenance
247
12.7.3 Pick-up drive (III)
a
III
III
Fig. 181
Right and left sides of the machine
At the factory the spring has been preset (1) to a = 60 mm.
• Open the protective cover on the right or left side of the machine
• Unscrew the counter nut (2)
• By screwing in the bolt (3), increase the tension of the spring (1)
• Secure the bolt (3) with the counter nut (2)
• Close protective cover
Pos: 36.30 /BA/--- ------------ Seitenumbruch------ ---------- @ 0\mod_119617 5311226_0.doc x @ 4165 @ 32 @ 1