Krone Big Pack 4x4 - Menu 1-1 Knotter Settings“

KRONE ISOBUS-Terminal CCI 100
85
Pos: 22.63 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-BiG Pac k/Hauptmenüs/Haup tmenü 1 Einstellungen/ Menü 1-1 „Knotereinste llungen“ HS Baureihe @ 99\ mod_1329907098199_ 78.docx @ 884813 @ 3 @ 1
6.10.1 Menu 1-1 „Knotter Settings“
CC000054_1
1-1
Fig. 51
Calling the Menu
Main menu 1 “Settings” is called.
• Select menu 1-1
by pressing function key or , the symbol is highlighted in
grey
• Press function key
The display shows menu 1-1 “Knotter Settings”.
The menu level 1-1 “Knotter Settings" is divided into up to 5 menus, depending on how the
machine is equipped:
Menu 1-1-1 “Correction value for bale length”
Menu 1-1-2 “Knotter signal”
Menu 1-1-3 “Knotter monitoring”
Menu 1-1-5 “Bales / blow” (with electronic knotter triggering)
Menu 1-1-6 "Blow time"
Pos: 22.64 /BA/--- ------------ Seitenumbruch------ ---------- @ 0\mod_119617 5311226_0.doc x @ 4165 @ @ 1