Safety
37
1)
Before starting the machine,
read and observe the operating
instructions and safety
instructions.
Order No. 939 471-1 (1x)
2)
PTO speeds must not exceed 1000 rpm! The
operating pressure of the hydraulic system must
not exceed 200 bar!
939 101-4
MAX.1000/ min
MAX.200bar
Order No. 939 101-4 (1x)
3)
Danger from rotating auger.
Order No. 939 520 1 (2x)
4)
Never reach into the working
area of the Pick-up as long as
the machine is running.
Order No.: 939 407-1 (2x)
5)
Do not climb onto the machine if
the PTO is connected and the
engine is running.
Order No.: 939 408-2 (2x)
6)
Before start-up close the protective equipment!
Order No.: 942 002-4 (7x)
7)
As long as parts may be moving,
never reach into areas where
there is a risk of being crushed.
(only for roller chute and XC
cutting system)
Order No. 942 196 1 (9x)
8)
Maintain a sufficient distance from hot surfaces.
(optional)
Order No.: 942 210-0 (1x)
9)
Do not stay in the swivel range of the chute.
Keep your distance!
Order No. 939 469 1 (2x)
Pos: 13.13 /BA/--- ------------ Seitenumbruch------ ---------- @ 0\mod_119617 5311226_0.doc x @ 4165 @ @ 1
939 520-1
942 196 -1
To Next Page
Loading...
