Krone Big Pack 4x4 - Page 77

KRONE ISOBUS-Terminal CCI 100
77
Pos: 22.37.27 /BA/I nfo-Center/CCI- ISOBUS-Terminal/CCI -BiG Pack/Grundbild Hand betrieb/Einstel len der Multibaleanzahl Handbetrieb Bild HS Baurei he @ 99\mod_13298973934 76_78.docx @ 884193 @ @ 1
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11F11
F12
1/2
Fig.44
Pos: 22.37.28 /BA/I nfo-Center/CCI- ISOBUS-Terminal/CCI -BiG Pack/Grundbild Hand betrieb/Einstel len der Multibaleanzahl Handbetrieb @ 43\mod_12 75295579953_78.doc x @ 390084 @ 2 @ 1
Setting the number of MultiBales (MultiBale only)
CAUTION! - Mixture of total bale and MultiBale
The MultiBale number should only be changed at the beginning of a bale. Doing so could result
in a mixture of total bale and MultiBale.
Note
First, set the bale length. Minimum length of the MultiBale: 45 cm (17.7 inches).
Pos: 22.37.29 /BA/I nfo-Center/CCI- ISOBUS-Terminal/CCI -BiG Pack/Scroll-Rad an wählen,springen,er höhen bzw. verringer n,speichern @ 43\mod_127529 5180531_78.doc x @ 390064 @ @ 1
• You can use the scroll wheel to select the desired selection (A) (the selection box is
highlighted in color)
• Pressing the scroll wheel allows you to jump to the selection box (the selection box is
highlighted in color)
• Turning the scroll wheel increases or reduces the value
• Pressing the scroll wheel causes the setting to be applied and returns you from the
selection box
Pos: 22.37.30 /BA/I nfo-Center/CCI- ISOBUS-Terminal/CCI -Rundballenpressen/ Grundbild/Hinweis Ei nstellung über Touchsc reen @ 79\mod_1315290 154790_78.doc x @ 701913 @ @ 1
Note
The values can also be set via the touchscreen.
Pos: 22.38 /BA/--- ------------ Seitenumbruch------ ---------- @ 0\mod_119617 5311226_0.doc x @ 4165 @ @ 1