Kuka ready2 educate - Status Keys

Element Description
USB connec-
tion
The USB connection is used, for example, for archiv-
ing and restoring data.
Only for FAT32-formatted USB sticks.
10.2 Status keys
Procedure
Displaying the status keys:
• In the main menu, select Configuration > Status keys > Gripper/
SpotTech.
Precondition
The status keys can only be operated if the following conditions are met:
• T1 or T2 mode
• Enabling switch is pressed.
• Submit interpreter is running.
Description
Status key Description
If multiple grippers are available, toggle
between grippers using this status key.
To open the Gripper/SpotTech display,
hold the key down for longer (approx. 2s).
Open the gripper with this key.
Close the gripper with this key.
Gripper 2: ejector
Only for ready2_educate_pro_vision and
ready2_educate_advanced_vision
Vacuum ON
Only for ready2_educate_pro_vision and
ready2_educate_advanced_vision
Blast air ON
Only for ready2_educate_pro_vision and
ready2_educate_advanced_vision
OFF state
Only for ready2_educate_pro_vision and
ready2_educate_advanced_vision
ready2_educate
BA ready2_educate V8 | Issued: 05.09.2018 www.kuka.com | 103/154
Operation