Kuka ready2 educate - Ejector; Mounting Plate, Electrical System; Ready2_Educate_Advanced_Vision

1 Cable duct 5 Holder for vacuum cup
2 Camera with lens 6 Ruler with cube
3 Spiral hose 7 Calibration plate
4 Cube with vacuum cup 8 Centering station
3.5.8 Ejector / mounting plate, electrical system
Description
With the vision option, additional components are installed.
Overview
Fig. 3-35: Ejector / mounting plate, electrical system
1 -GS1 ejector
2 -XOV 24 V power supply, PE connections
3 -A11 switch vision
3.6 ready2_educate_advanced_vision
Description
The ready2_educate_advanced_vision cell is used for teaching advanced
programming of KUKA robots.
Using the vision option, the position of a cube can be detected with a
camera and the cube can then be gripped using a vacuum cup.
ready2_educate
BA ready2_educate V8 | Issued: 05.09.2018 www.kuka.com | 35/154
Product description