Kuka ready2 educate - Transportation by Fork Lift Truck; Transportation by Pallet Truck

7.1.3 Transportation by fork lift truck
Description
The cell can be transported by fork lift truck for short distances and only
indoors.
The ready2_educate cell must not be damaged when moving the fork lift
truck into position.
CAUTION
The training cell may only be transported in the vertical position. Dam-
age to property may otherwise result.
Procedure
1. Perform data backup.
2. Move robot into its transport position.
3. Switch off the ready2_educate cell and secure it to prevent unauthor-
ized persons from switching it on again.
4. Disconnect the power cable from the supply.
5. Disconnect all supply lines (pneumatic lines, power cable) and stow
them.
6. Remove all components from the application and stow them.
7. Secure the safety door so that it cannot open on its own.
8. Carry out a visual inspection before transportation.
9. Carefully pick up the ready2_educate cell with the fork lift truck and
transport it away.
Fig. 7-3: Transportation by fork lift truck
7.1.4 Transportation by pallet truck
Description
The cell can be transported by pallet truck for short distances and only in-
doors.
The ready2_educate cell must not be damaged when moving the pallet
truck into position.
CAUTION
The training cell may only be transported in the vertical position. Dam-
age to property may otherwise result.
ready2_educate
BA ready2_educate V8 | Issued: 05.09.2018 www.kuka.com | 87/154
Transportation