Kuka ready2 educate - Mounting Plate, Pneumatic System

3.4.5 Mounting plate, pneumatic system
Description
The service unit supplies the gripper with compressed air. The operating
pressure for the gripper can be set using the pressure regulating valve.
The shut-off valve is used for locking and unlocking the service unit.
The pneumatic system mounting plate may vary according to the
ready2_educate variant.
Setting:
• Operating pressure: 6 bar
Fig. 3-22: Mounting plate, pneumatic system
1 Shut-off valve
2 Pressure regulating valve
3 Multiple distributor
4 Solenoid valve
5 Service unit
6 Pressure gauge
7 Filter unit
8 Condensate drainage screw
ready2_educate
26/154 | www.kuka.com BA ready2_educate V8 | Issued: 05.09.2018
Product description