5.1.3 Intended use
The training cell is intended exclusively for the use designated in the “Pur-
pose” chapter of the operating instructions.
Using it for any other or additional purpose is considered misuse and is
not allowed. The manufacturer cannot be held liable for any resulting dam-
age. The risk lies entirely with the user.
Operation in accordance with the intended use also requires compliance
with the assembly and operating instructions for the individual compo-
nents, with particular reference to the maintenance specifications.
Misuse
Any use or application deviating from the intended use is deemed to be
misuse and is not allowed. This includes e.g.:
• Using the cell or its components in an industrial system.
• Use for experimental purposes.
• Alteration of the components (e.g. modification of the gripper).
• Use of a tool or a training application without taking the associated
risks into account.
• Exceeding the operating times.
• Use outside the permissible operating parameters
• Operation in potentially explosive environments
• Outdoor operation
5.1.4 Personnel
• All persons working with the training cell must have read and under-
stood the documentation of the training cell, industrial robot and robot
controller, including the safety chapters.
• All personnel who work on the training cell must receive safety instruc-
tion and confirm this.
• Work on the robot system may only be carried out under the instruc-
tion of a qualified/certified instructor.
All persons working with the training cell must have read and under-
stood the documentation of the training cell, industrial robot and robot
controller, including the safety chapters.
Trainer
The trainer must observe the labor laws and regulations. These include,
e.g.:
• The trainer is certified.
• The trainer must comply with his monitoring obligations.
• The trainer must instruct the training participants and notify them of re-
sidual risks.
• The trainer must explain the operator control elements of the training
cell to the training participants.
Training participant
The training participant must meet the following requirements:
• The training participant must receive safety instruction and confirm
this.
ready2_educate
BA ready2_educate V8 | Issued: 05.09.2018 www.kuka.com | 77/154
Safety
To Next Page
Loading...
