10.1.2 Rear view
Overview
Fig. 10-2: KUKA smartPAD, rear view
1 Enabling switch 4 USB connection
2 Start key (green) 5 Enabling switch
3 Enabling switch 6 Identification plate
Description
Element Description
Rating plate Rating plate
Start key The Start key is used to start a program.
Enabling
switch
The enabling switch has 3 positions:
• Not pressed
• Center position
• Fully pressed (panic position)
The enabling switch must be held in the center posi-
tion in operating modes T1 and T2 in order to be
able to jog the manipulator.
In the operating modes Automatic and Automatic Ex-
ternal, the enabling switch has no function.
ready2_educate
102/154 | www.kuka.com BA ready2_educate V8 | Issued: 05.09.2018
Operation
To Next Page
Loading...
