Kuka ready2 educate - Operator Control Via Touch Panel

10.3 Operator control via touch panel
Description
For the ready2_educate_advanced variant, there is an additional touch
panel for operator control.
The touch panel has the following functions:
• 16 digital inputs
• 16 digital outputs
• 1 analog input
• 1 analog output
• Inputs and outputs for use by the trainer
• Display of messages
• Setting the language
• Start Automatic External
Start menu
Fig. 10-3: Start menu user interface
Item
Description
1 Message window for current error messages
2 Start menu user interface
3 Automatic External inputs user interface
4 Automatic External outputs user interface
5 Analog I/O robot user interface
6 Training I/O robot user interface
7 Messages user interface
8 Select language
9 START EXT button
ready2_educate
104/154 | www.kuka.com BA ready2_educate V8 | Issued: 05.09.2018
Operation