Kuka ready2 educate - Page 105

Item
Description
This button becomes active when Automatic External mode is
selected.
• Flashing green: program is ready to start
• Lit up green: program is active
Inputs
The status of the inputs can be read and set in the Automatic External
inputs user interface.
• Red: input is not set
• Green: input is set
The status of the input can be changed by tapping on the slide switch.
Fig. 10-4: Automatic External inputs user interface
Outputs
The status of the outputs can be read and set in the Automatic External
outputs user interface.
• Red: output is not set
• Green: output is set
The status of the output can be changed by tapping on the slide switch.
ready2_educate
BA ready2_educate V8 | Issued: 05.09.2018 www.kuka.com | 105/154
Operation