Kuka ready2 educate - Control Panel; Operator Control and Display Elements

3.6.2 Control panel
Description
The control panel contains the display and operator control elements, the
EMERGENCY STOP safety system and operator safety for operation of
the training cell.
Fig. 3-38: Control panel
1 smartPAD 2 Operator control and display
elements
3.6.2.1 Operator control and display elements
Fig. 3-39: Operator control and display elements
Item
Description
1 Touch screen
2 Main switch
The main switch is used to switch the cell on and off. If the
main switch is turned off, the robot drives and the entire robot
cell are switched off and all motions are stopped.
3 EMERGENCY STOP device with key
ready2_educate
BA ready2_educate V8 | Issued: 05.09.2018 www.kuka.com | 37/154
Product description