Procedure
1. Perform data backup.
2. Move robot into its transport position.
3. Switch off the ready2_educate cell and secure it to prevent unauthor-
ized persons from switching it on again.
4. Disconnect the power cable from the supply.
5. Disconnect all supply lines (pneumatic lines, power cable) and stow
them.
6. Remove all components from the application and stow them.
7. Secure the safety door so that it cannot open on its own.
8. Carry out a visual inspection before transportation.
9. Carefully pick up the ready2_educate cell with the pallet truck and
transport it away.
Fig. 7-4: Transportation by pallet truck
ready2_educate
88/154 | www.kuka.com BA ready2_educate V8 | Issued: 05.09.2018
Transportation
To Next Page
Loading...
