Kurzweil PC3K Series - The Controllers (CTLS) Page

6-50
Program Mode
The Controllers (CTLS) Page
The Controllers (CTLS) Page
PresstheCTLSsoftbuttontocalluptheControllers(CTLS)page.TheControllerspageisalist
ofthecontrollersonthePC3Kyouwillbemostlikelytouseascontrolsourcesandthevaluesof
thosecontrollers.Thepageappearsthusly:
Inadditiontobeingabletoenter
controllervalues,youcanusetheSetCtlsoftbutton(locatedto
therightoftheCTLSsoftbutton),whichcapturesthepositionsofthecontrollerslistedonthe 
page.Keepinmindthatbecausethecontrollersaredigital,youmustengagethecontrollerevery
timeyouchangeprogramsbeforethe PC3K
recognizesanychangeinthecontrollervalue.Ifyou
changeprograms,andthenpresstheSetCtlsoftbuttonbeforeengaginganyofthecontrollers,
thecontrolvalueswillremainatzero.
ThenumberinparenthesesthatappearsnexttothecontrollernameistheMIDIcontroller
numberwithwhichthatcontroller
transmitsandreceivesbydefault,i.e.,withtheControlSetup
setto126InternalVoice sontheMIDImodeTransmitpage.SeeControlSetupandChapter7:
SetupModeandSetupEditorformoreinformationontheControlSetup.
Controller Range of Values Default Value
Slider A (6) None, 0-127 0
Slider B (13) None, 0-127 0
Slider C (22) None, 0-127 0
Slider D (23) None, 0-127 0
Slider E (24) None, 0-127 0
Slider F (25) None, 0-127 0
Slider G (26) None, 0-127 0
Slider H (27) None, 0-127 0
Slider I (28) None, 0-127 0
Modwheel (1) None, 0-127 0
Breath Controller (2) None, 0-127 0
Switch 2 (29) 0, 127 0